Bg Triton Display Bedienungsanleitung PDF herunterladen (Seite 50)

48 |

Autopilot Setup | Triton Operation Manual

Dockside

The dockside procedures are initiated from the commissioning dialog. Completed procedures

are labelled with a tick.

The following menu items are accessible and can be set up in the Installation menu:

• Boat type

• Rudder feedback

• Drive voltage

• Drive engage

• Rudder test

• Depth calibration

• Minimum wind angle

• Nav change limit

Boat Type

Type of boat selected will aﬀect the steering parameters, and the functions available in the

autopilot system. The options are: Planing, Displacement, Sail and Outboard.

¼ Note: Wind mode is only available if boat type is set to sail.

Drive voltage (V)

Sets the drive voltage type to 12 or 24V

Rudder Feedback Calibration

Make sure the unit is installed and aligned as per instruction in the AC12/42 Installation

manual. The rudder feedback calibration will set the correct relationship between the physical

rudder movement and the rudder angle readout.

Max starboard

•Manuallymovethehelmtostarboarduntiltherudderstopsatstarboardlockhardover.

•TheMaxstarboardangleistheanglereadbytherudderfeedbackunitbeforeany

adjustment is made.

•Iftheactualrudderangleisdierentfromtheangledisplayed,correctthereadingwiththe

Up/Down keys.

•ConrmRudderfeedbackcalibrationtostarboardbyselectingNext.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 67 68

Keine Kommentare

Bg Triton Display Bedienungsanleitung Seite 50